View STD11NM60ND10_4969565.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STD11NM60ND, STF/I11NM60ND STP11NM60ND, STU11NM60ND
N-channel 600 V, 0.37 10 A, FDmeshTM II Power MOSFET , 2PAK, TO-220, TO-220FP, IPAK, DPAK I
Features
Order codes STD11NM60ND STF11NM60ND STI11NM60ND STP11NM60ND STU11NM60ND VDSS (@Tjmax) RDS(on) max ID 10 A 10 A(1) 10 A 10 A 10 A
3 1
3 12
650 V
< 0.45
DPAK
3 2 1
IPAK
IPAK
3 1 2
1 2 3
1. Limited only by maximum temperature allowed
The worldwide best RDS(on)* area amongst the fast recovery diode devices 100% avalanche tested Low input capacitance and gate charge Low gate input resistance Extremely high dv/dt and avalanche capabilities
TO-220
TO-220FP
Application
Switching applications
Figure 1.
Internal schematic diagram
Description
The device is an N-channel FDmeshTM II Power MOSFET that belongs to the second generation of MDmeshTM technology. This revolutionary Power MOSFET associates a new vertical structure to the company's strip layout and associates all advantages of reduced onresistance and fast switching with an intrinsic fastrecovery body diode.It is therefore strongly recommended for bridge topologies, in particular ZVS phase-shift converters. Table 1. Device summary
Order codes STD11NM60ND STF11NM60ND STI11NM60ND STP11NM60ND STU11NM60ND October 2010 Marking Package DPAK TO-220FP I2PAK TO-220 IPAK Packaging Tape and reel Tube Tube Tube Tube 1/19
www.st.com 19
11NM60ND
Doc ID 14625 Rev 2
Contents
STD/F/I/P/U11NM60ND
Contents
1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.1 Electrical characteristics (curves) ............................ 7
3 4 5 6
Test circuits
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2/19
Doc ID 14625 Rev 2
STD/F/I/P/U11NM60ND
Electrical ratings
1
Electrical ratings
Table 2.
Symbol
Absolute maximum ratings
Value Parameter DPAK/IPAK, TO-220/IPAK 600 25 10 6.3 40 90 40 2500 -55 to 150 150 10 (1) 6.3(1) 40 (1) 25 Unit TO-220FP V V A A A W V/ns V C C
VDS VGS ID ID IDM (2) PTOT dv/dt (3) VISO Tstg Tj
Drain-source voltage (VGS=0) Gate-source voltage Drain current (continuous) at TC = 25C Drain current (continuous) at TC = 100C Drain current (pulsed) Total dissipation at TC = 25C Peak diode recovery voltage slope Insulation withstand voltage (RMS) from all three leads to external heat sink (t=1s;TC=25C) Storage temperature Max. operating junction temperature
1. Limited only by maximum temperature allowed 2. Pulse width limited by safe operating area 3. ISD 10 A, di/dt 400 A/s, VDD = 80% V(BR)DSS, peak VDS V(BR)DSS
Table 3.
Symbol
Thermal data
Value Parameter TO-220 IPAK DPAK IPAK TO-220FP Thermal resistance junction-case max Thermal resistance junction-amb max 62.5 50 300 300 Unit
Rthj-case Rthj-amb
1.38 100
5 62.5
C/W C/W C/W C
Rthj-pcb(1) Thermal resistance junction-pcb max Tl Maximum lead temperature for soldering purposes
1. When mounted on 1inch FR-4 board, 2 oz Cu
Doc ID 14625 Rev 2
3/19
Electrical ratings
STD/F/I/P/U11NM60ND
Table 4.
Symbol IAS EAS
Avalanche characteristics
Parameter Avalanche current, repetitive or not-repetitive(1) Single pulse avalanche energy (2) Max value 3.5 200 Unit A mJ
1. Pulse width limited by Tj max 2. starting Tj= 25 C, ID=IAS, VDD= 50 V
4/19
Doc ID 14625 Rev 2
STD/F/I/P/U11NM60ND
Electrical characteristics
2
Electrical characteristics
(TCASE = 25 C unless otherwise specified) Table 5.
Symbol V(BR)DSS dv/dt(1) IDSS IGSS VGS(th) RDS(on)
On/off states
Parameter Drain-source breakdown voltage Drain-source voltage slope Zero gate voltage drain current (VGS = 0) Gate body leakage current (VDS = 0) Gate threshold voltage Static drain-source on resistance Test conditions ID = 1 mA, VGS= 0 VDD = 480 V,ID = 10 A, VGS = 10 V VDS = max rating, VDS = max rating,@125 C VGS = 20 V VDS= VGS, ID = 250 A VGS= 10 V, ID= 5 A 3 4 0.37 Min. 600 45 1 100 100 5 0.45 Typ. Max. Unit V V/ns A A nA V
1. Value measured at turn off under inductive load
Table 6.
Symbol gfs(1) Ciss Coss Crss Coss eq.(2)
Dynamic
Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Equivalent output capacitance Gate input resistance Total gate charge Gate-source charge Gate-drain charge Test conditions VDS =15 V, ID= 5 A VDS = 50 V, f =1 MHz, VGS = 0 Min. Typ. 7.5 850 44 5 130 Max. Unit S pF pF pF pF
-
-
VGS = 0, VDS = 0V to 480 V f=1 MHz Gate DC Bias=0 Test signal level=20 mV open drain VDD = 480 V, ID = 10 A VGS = 10 V (see Figure 19)
-
-
Rg Qg Qgs Qgd
1.
-
3.7 30 4 16
-
nC nC nC
-
-
Pulsed: pulse duration = 300s, duty cycle 1.5%
2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS
Doc ID 14625 Rev 2
5/19
Electrical characteristics
STD/F/I/P/U11NM60ND
Table 7.
Symbol td(on) tr td(off) tf
Switching times
Parameter Turn-on delay time Rise time Turn-off delay time Fall time Test conditions VDD = 300 V, ID = 5 A, RG = 4.7 , VGS = 10 V (see Figure 18) Min Typ 16 7 50 9 Max Unit ns ns ns ns
-
-
Table 8.
Symbol ISD ISDM (1) VSD(2) trr Qrr IRRM trr Qrr IRRM
2.
Source drain diode
Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 10 A, VGS=0 ISD =10 A, di/dt =100 A/s, VDD = 100 V (see Figure 20) VDD = 100 V di/dt =100 A/s, ISD = 10 A Tj = 150 C (see Figure 20) Test conditions Min 130 0.69 11 200 1.2 12 Typ Max 10 40 1.3 Unit A A V ns C A ns C A
-
1. Pulse width limited by safe operating area Pulsed: pulse duration = 300s, duty cycle 1.5%
6/19
Doc ID 14625 Rev 2
STD/F/I/P/U11NM60ND
Electrical characteristics
2.1
Figure 2.
Electrical characteristics (curves)
Safe operating area for TO-220, IPAK Figure 3. Thermal impedance for TO-220, IPAK
Figure 4.
ID (A)
Safe operating area for TO-220FP
AM08612v1
Figure 5.
Thermal impedance for TO-220FP
10
is
pe ra ite tion d by in t m his ax a RD rea
S(
on
10s 100s 1ms Tj=150C Tc=25C Single pulse 10ms
1
O
0.1
0.01 0.1
Li
m
)
1
10
100
VDS(V)
Figure 6.
ID (A)
Safe operating area for DPAK, IPAK Figure 7.
AM08613v1
Thermal impedance for DPAK, IPAK
Op Lim era ite tion d by in th m is ax ar RD ea
is
10
10s
S( on )
100s 1ms Tj=150C Tc=25C Single pulse 10ms
1
0.1 0.1
1
10
100
VDS(V)
Doc ID 14625 Rev 2
7/19
Electrical characteristics Figure 8. Output characteristics Figure 9.
STD/F/I/P/U11NM60ND Transfer characteristics
Figure 10. Transconductance
Figure 11. Static drain-source on resistance
Figure 12. Gate charge vs gate-source voltage Figure 13. Capacitance variations
8/19
Doc ID 14625 Rev 2
STD/F/I/P/U11NM60ND Figure 14. Normalized gate threshold voltage vs temperature
Electrical characteristics Figure 15. Normalized on resistance vs temperature
Figure 16. Source-drain diode forward characteristics
Figure 17. Normalized BVDSS vs temperature
Doc ID 14625 Rev 2
9/19
Test circuits
STD/F/I/P/U11NM60ND
3
Test circuits
Figure 19. Gate charge test circuit
VDD 12V
2200
Figure 18. Switching times test circuit for resistive load
47k 100nF
1k
RL VGS VD RG PW D.U.T.
F
3.3 F
VDD Vi=20V=VGMAX
2200 F
IG=CONST 100 2.7k 47k PW 1k
AM01469v1
D.U.T. VG
AM01468v1
Figure 20. Test circuit for inductive load Figure 21. Unclamped inductive load test switching and diode recovery times circuit
A D G S B 25 D.U.T.
A FAST DIODE B
A L=100H B D G 3.3 F 1000 F
L
VD
2200 F
3.3 F
VDD
VDD
ID
RG
S
Vi
D.U.T.
Pw
AM01470v1 AM01471v1
Figure 22. Unclamped inductive waveform
V(BR)DSS VD
Figure 23. Switching time waveform
ton tdon tr toff tdoff tf
90% IDM
90% 10%
ID VDD VDD
0
10%
VDS 90%
VGS
AM01472v1
0
10%
AM01473v1
10/19
Doc ID 14625 Rev 2
STD/F/I/P/U11NM60ND
Package mechanical data
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.
Doc ID 14625 Rev 2
11/19
Package mechanical data
STD/F/I/P/U11NM60ND
Table 9.
Dim.
TO-220FP mechanical data
mm Min. Typ. Max. 4.6 2.7 2.75 0.7 1 1.70 1.70 5.2 2.7 10.4 16 28.6 9.8 2.9 15.9 9 3 30.6 10.6 3.6 16.4 9.3 3.2
A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 Dia
4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10
Figure 24. TO-220FP drawing
L7 E
A B
D Dia L6 L5
F1
F2 F
H G1
G
L2 L3
L4
7012510_Rev_K
12/19
Doc ID 14625 Rev 2
STD/F/I/P/U11NM60ND
Package mechanical data
TO-220 type A mechanical data
mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 P Q 4.40 0.61 1.14 0.48 15.25 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 Typ Max 4.60 0.88 1.70 0.70 15.75
0015988_Rev_S
Doc ID 14625 Rev 2
13/19
Package mechanical data
STD/F/I/P/U11NM60ND
IPAK (TO-262) mechanical data
mm Dim Min A A1 b b1 c c2 D e e1 E L L1 L2 4.40 2.40 0.61 1.14 0.49 1.23 8.95 2.40 4.95 10 13 3.50 1.27 Typ Max 4.60 2.72 0.88 1.70 0.70 1.32 9.35 2.70 5.15 10.40 14 3.93 1.40 Min 0.173 0.094 0.024 0.044 0.019 0.048 0.352 0.094 0.194 0.393 0.511 0.137 0.050
inch Typ Max 0.181 0.107 0.034 0.066 0.027 0.052 0.368 0.106 0.202 0.410 0.551 0.154 0.055
14/19
Doc ID 14625 Rev 2
STD/F/I/P/U11NM60ND
Package mechanical data
TO-252 (DPAK) mechanical data
DIM. A A1 A2 b b4 c c2 D D1 E E1 e e1 H L L1 L2 L4 R V2 0o 0.60 0.20 8o 4.40 9.35 1 2.80 0.80 1 6.40 4.70 2.28 4.60 10.10 mm. min. 2.20 0.90 0.03 0.64 5.20 0.45 0.48 6.00 5.10 6.60 typ max. 2.40 1.10 0.23 0.90 5.40 0.60 0.60 6.20
0068772_G
Doc ID 14625 Rev 2
15/19
Package mechanical data
STD/F/I/P/U11NM60ND
TO-251 (IPAK) mechanical data
mm. DIM. A A1 b b2 b4 c c2 D E e e1 H L (L1) L2 V1 9.00 0.80 0.80 10 o 4.40 16.10 9.40 1.20 5.20 0.45 0.48 6.00 6.40 2.28 4.60 min. 2.20 0.90 0.64 typ max. 2.40 1.10 0.90 0.95 5.40 0.60 0.60 6.20 6.60
0068771_H
16/19
Doc ID 14625 Rev 2
STD/F/I/P/U11NM60ND
Packaging mechanical data
5
Packaging mechanical data
DPAK FOOTPRINT
All dimensions are in millimeters
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM. A B C D G N T 1.5 12.8 20.2 16.4 50 22.4 18.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0.795 0.645 0.724 1.968 0.881 BULK QTY 2500 inch MIN. MAX. 12.992
TAPE MECHANICAL DATA
DIM. A0 B0 B1 D D1 E F K0 P0 P1 P2 R
W
BASE QTY 2500
mm MIN. 6.8 10.4 1.5 1.5 1.65 7.4 2.55 3.9 7.9 1.9 40
15.7 16.3
inch MIN. MAX. 7 0.267 0.275 0.409 0.417 0.476 0.059 0.063 0.059 0.065 0.073 0.291 0.299 0.100 0.108 0.153 0.161 0.311 0.319 0.075 0.082 1.574
0.618 0.641
MAX. 10.6 12.1 1.6 1.85 7.6 2.75 4.1 8.1 2.1
Doc ID 14625 Rev 2
17/19
Revision history
STD/F/I/P/U11NM60ND
6
Revision history
Table 10.
Date 23-Apr-2008 25-Oct-2010
Document revision history
Revision 1 2 First release - Corrected Figure 2: Safe operating area for TO-220, IPAK - Corrected Figure 4: Safe operating area for TO-220FP - Corrected Figure 6: Safe operating area for DPAK, IPAK Changes
18/19
Doc ID 14625 Rev 2
STD/F/I/P/U11NM60ND
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
Doc ID 14625 Rev 2
19/19

▲Up To Search▲

Price & Availability of STD11NM60ND10

	To Download STD11NM60ND10 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .